Also View: Appliance Repair Mill Valley, California
DG Tech- Appliance Repair Company Blog
Friday, February 9, 2024
Thursday, June 15, 2023
Monday, June 5, 2023
Thursday, August 27, 2020
Common washing machine problems that require a washer repairman’s attention
It is not very uncommon to have your washing machine suddenly stops working which was working all fine and you then you start searching for a washer repairman to get it fixed.
You might have been using your washing machine for the past 2, 3 or 5 years or more or you might have bought it very recently. It's pretty sure that you had given so much thought and had gone through many brochures and recommendations before purchasing the one you have now. Given the variety of styles, models, sizes of washer available in the market, you have to choose one which meets the requirements of your budget, installation costs, and space at home.
Now that you have your washer, at some point, you might have encountered problems such as the water doesn't drain, jammed washer door, foaming all over, blocked hose, etc over the years. Let us see what are some common washing machine problems encountered by us and what we can do about it.
Here is a list of the most common washing machine problems and solutions:
Also do try these simple DIY tips mentioned below which might help you fix the washing machine in minor faults.
1) Washing machine door lock problem:
You might have encountered this problem at least one or two times if you have a front load washing machine. The water should be kept inside and saved from spilling out during the cycle and that's why front loaders should be tightened throughout the operation and unlock them automatically. However, some malfunctioning of the washer causes the door to remain closed even after the cycle trapping clothes and water inside. This could have happened due to reasons such as:
a. jammed locker as some clothes might have got stuck in the way,
b. a bug in the washer's computer,
c. improper drainage of the washing machine leaving the door locked with a drum full of water. Now, what can you do about it?
Here's how you can DIY the fix :
1. Try restarting your washer appliance: This traditional repair treatment will never go out of style. Try plugging off the washer and wait for some minutes before starting it again.
2. Check out the hose: As mentioned earlier, a clogged drainage hose may be causing all these problems.
3. Run a short cycle: Sometimes it could be your clothes causing the problem. It might have got stuck in the door, preventing the automatic unlock. If you run a short cycle, luckily the clothes will get moving and help unlock the door.
Lastly, if nothing works, contact the manufacturer if the appliance is in the warranty period and they might be having some advice for you to try out or simply take the help of an expert washer appliance technician.
2) Washing machine problems water not draining:
This is one of the most common problems that we usually encounter with our laundry washing machines. They are various reasons that may cause this, some of them are :
a. Clogged drain: Sometimes the drain hose may be clogged with small clothing or other debris.
b. Your washer might be malfunctioning and not performing its duties of spin /dry properly. In such cases check your manual or give your washing machine repairman a call!
c. Broken drain pump- Your washer appliance will make an unpleasant sound or start leaking in such a case.
Here's how you can fix it washing machine issue:
1. Use the age-old method of resetting your washer machine. Turn the machine off and wait for a minute before you turn it on again. If this doesn't solve the problem, they master resetting your appliance.
2. Master reset: This is a rather more technical form of reset used by repairmen. In order to master reset your appliance, you have to keep opening and closing the door 6 times within the time frame of 12 seconds. Then, run the spin cycle without any clothing items to check if the problem is resolved. If it starts draining, then your problem is resolved. If not, you can try unclogging.
3. Unclog the drain hose:
■ Turn your washer machine off. Remember to do this before moving or making any adjustments to your appliance.
■ Check if the drain hose is bent or kinked. This affects the draining capacity of the washer appliance and may cause errors sometimes.
■ Remove the drain hose from the machine, you will usually find it at the back of the machine. It's fixed with few screws on to the machine so pulling it out isn't really a tiresome job.
■ Use some water or any long object like a plumbing snake or stick to vigor the block out. If this still fails to unclog your drain, try running the hottest cycle on your machine while it's empty as it can help loosen the blockage and enforce it out.
■ Once the water begins to run steadily through the washer's drain hose re-attach it to the machine. Make sure that the hose isn't bent or kinked while re-attaching it as it can affect the efficiency of the appliance.
If your problem still remains unresolved it's best to call a washer repairman as they are the true machine experts!
3) Bad odour from the washer appliance Troubleshooting:
Usage of washer over time will give it's way to bad smell and your clothes end up getting that smell. You can clean the washer by running an empty cycle using water and the cleaner. Even then if you are sensing the bad odor lingering around, you can try a
DIY Tip: Use some vinegar and baking soda and mix baking soda with water. Before pouring the baking soda mix to the detergent compartment, run an empty cycle, and get rid of small particles. And pour vinegar directly into the washer.
4) Tripping of the fuse in washer machine:
Several homeowners complain that their washing machines keep tripping the power. This could be caused due to several factors and it's sometimes difficult to determine the root cause of this problem.
The motor could be at fault, there could be a leak and the waters flowing where the power should be. Overloading of the machine could have overheated the motor.
However, this problem can be avoided by just not overloading the machine but if your machine is unable to manage your laundry you can always think about upgrading to a better, more efficient one which can handle your laundry without causing any power trips.
If the problem still continues it's best to call an expert washer appliance technician and discuss the washing machine repair process.
5) The washer appliance jumps around:
This is a sign of an imbalanced washer. This is a serious issue to consider as it is damaging your washer every time it happens. It could have happened:
a. Due to excess load. If you happen to put more clothes than its capacity, there could be a chance of this happening.
b. One leg of your washer is shorter than the other: The high-speed centrifugal force removes water from clothes and if one leg happens to be shorter, it could cause a havoc spin.
How to solve this problem washer machine problem?
1. Make sure if the legs are aligned properly on a flat surface. Using a spirit level can help you position them properly.
2. If your washer is new, there are 2 or 3 large bolts called transit bolts fixed at your washer's back. You can easily remove them for the proper functioning of the washing machine.
3. If the problem doesn't go away, you might consider contacting a washer machine repairman or probably consider buying a new washer.
While you can repair it with your own little skills, sometimes it can go all wrong. So if your washer is a recently bought one, it is suggested to contact a skilled professional washer technician.
Conclusion:
It is a normal tendency from our side to handle the issues with the knowledge and skill we have. Sometimes, following the manual or other tutorials may help you solve your washer issue. And fortunately, you might have saved some bucks. But the real problem arises if you have limited knowledge and access to repair works. If you try to give it a hand, you could end up figuring out the problems for days and trying to solve it costing you time and money. And even if you make it work, you don't know if it's temporary or you might encounter the same issue after a few days. And here are the reasons we think you should hire a washing machine repair service provider:
● You can save on your energy bills: A faulty washer can use a lot of energy than usual and it can add to your total bill. Instead, investing in a expert washer technician can help you save money for the coming months.
● The repairman can fix the problem once and for all: It is of no doubt that a professional repairman can fix the issue and not trigger the problem again for a long time.
● Improved efficiency: The washer or any appliance for that matter will have reduced efficiency if you done get it repaired or only do very limited maintenance. A washer repairman can solve many other hangover issues too and improve the overall efficiency of your washer.
It is made clear that contacting a professional appliance repairman is always the best decision to make while you are having trouble with your washing machine. You can have your peace of mind and not worry about the issue resurfacing in the near future.
If you have any faults in your washer or any other small home appliance then feel free to contact our company DG Tech Appliance Repair, as we have grown to be one of the most reputable appliance & washer repair company throughout San Francisco Bay area, California.
Visit this link to learn more about our washer repairman services near you : https://www.dg-tech-appliance-repair.com/washing-machine-washer-service-near-me/
We serve several regions in Marin County of the San Francisco North Bay area. We also serve major areas in Contra Costa County which is located in the San Francisco East Bay area. Our main service regions in SF North Bay & East Bay areas are Novato, San Rafael, Pinole, San Anselmo, Ross, Corte Madera, Larkspur, Gallinas, Santa Venetia, Los Ranchitos, Lucas Valley-Marinwood, Burdell Island, Black Point-Green Point, Hercules, Hilltop Mall, Rodeo, Crockett, El Sobrante, Tara Hills,& Tormey.
Click here to know more about service areas: https://www.dg-tech-appliance-repair.com/locations/#service-areas
We are providing service for all major home appliance brand products such as- GE, Kenmore, Whirlpool, Frigidaire, Maytag, Electrolux, Amana, Roper, KitchenAid, Hotpoint, Magic Chef, Sharp, Admiral, Kirkland, Tappan, etc.
Contact us today for a same day service for washer repairman in San Francisco Bay area, California.
Also do check out our web presence from links below:
https://pinterest.com/dgtechappliancerepair/
https://www.instagram.com/dgtechappliancerepair/
https://en.gravatar.com/dgtechappliancerepairs
http://dgtechappliancerepair.mystrikingly.com/
https://www.instapaper.com/p/dgtechappliance
https://dgtechappliancerepair.tumblr.com/
https://itsmyurls.com/dgtechappliance
https://nimbusweb.me/s/share/3490495/19dwxwh8cw4w3s81g1b9
https://followus.com/dgtechappliancerepair
See Full Article Here:
Common washing machine problems that require a washer repairman’s attention
Tuesday, May 26, 2020
Why hiring an appliance repair service in San Rafael is a smarter option than Repacing them?
From Refrigerators to dishwashers, homeowners spend a good amount annually to purchase and maintain their home devices. The good thing is, there’s a useful and affordable answer to the shock costs and hassles when your daily household appliances break. Small kitchen & laundry appliances like washer & dryers, refrigerators, dishwashers, microwaves,, built-in oven are often much less expensive to repair than to replace. And if you are bad in doing the repair yourself, you then should make sure that you hire a good local home appliance repairman to carry out the job for you.
The technician's price or the total amount you have to pay him usually depends upon the degree of the device faults, the technician's experience, and various other factors. An Expert appliance technician can certainly find the root cause of the device problems and find out the malfunctioning part quicker. He also knows where one can choose the right replacement part in the event you need one.
It makes sense to hold on to your current electrical equipment. The efficiency of today’s brands and the quality of their manufacturing means that they will continue to operate for years on end, but in time, they may need a little care. It is at this time that some homeowners are tempted to purchase entirely new appliances when a simple repair will do.
Choosing the best company is the first and foremost thing you should take into consideration. If you choose an inexperienced repairman then he might not fix the faults properly and it will increase your headache in the coming days with reoccurring problems or even new problems arisen. To find the most reliable provider for appliance repair nearby, you need to contact your friends or relatives or just do a Google search and find the company that has positive reviews and ratings from previous customers by which you can get an idea company till date records.
Call them up to tell them your appliance problems and ask them other questions like their experience, availability, etc as u wish to. Also, ask about their diagnose expense as most companies charge a minimum fee for the visit (normally $50 to $100 in most cases)
Repairing your appliances is far better than replacing them and if you are still asking the question whether should I fix my appliances or buy new? , then below are few of the benefits mentioned which might clear your confusions:
Consider lifespan and utility: An good appliance maintenance service provider can rectify simple or complex issues, extending the life of your appliances. With regular maintenance, your appliances should last many years, but even once they have passed beyond the manufacturer’s warranty—which often only encompasses often a quarter of their lifespans or less—they can still be of use.
Compare with the cost of a new appliance: New appliances are far from cheap, and repairs to your existing appliances can mean five or more years of continuous operation. With proper maintenance practices, your existing appliances will remain efficient, reducing their operating costs. Keep in mind that our appliance repair company in San Rafael offers peace of mind warranties to put your mind at ease.
Avoid impulse purchases: Buying a brand new appliance on a whim can land you in a financially unstable situation. When an appliance you own requires repair, always contact our appliance repair specialist first. Often consumers who choose to buy a new appliance with little to no research end up buying a whole new set of issues on top of the initial cost.
At DG Tech appliance repair, we can show you the benefits of keeping your existing appliances and caring for them rather than purchasing a new, expensive set of equipment.
The service provided is for all the major home appliance brands such as GE, Whirlpool, Kenmore, Maytag, Frigidaire, Kitchen Aid, Electrolux, Amana, Roper, Kirkland, and other common ones.
Call us at (415) 295-6557 to schedule an appointment for same day San Rafael appliance repair service and also to nearby San Francisco North bay areas such as San Anselmo, Ross, Larkspur, Corte Madera, Gallinas, McNears Beach, Santa Venetia, Lucas Valley-Marinwood & Nearby Areas or visit us online to learn more today.
https://www.dg-tech-appliance-repair.com/san-rafael/
Also, do check our other online presence:
Google Business site: https://dgtechappliancerepair-san-rafael.business.site/
Find us on Google map: https://www.google.com/maps?cid=13027966448782932771
Facebook: https://www.facebook.com/dgtechappliancerepair/
Youtube: https://www.youtube.com/channel/UC4Wj7_Va6tFnLVeRcPMwj0g
Find us on Bing - https://www.bing.com/maps/sharing?osid=2e6fb0ab-1a30-4235-9532-77855a9c54ea&cp=38.014259~-122.534851&lvl=13&imgid=63cd7d40-0fe7-4d83-86d8-8fd860008b63&v=2&sV=2&form=S00027
Peartrees: http://www.pearltrees.com/dgtechappliancerepair_sanrafael
Crunchbase: https://www.crunchbase.com/organization/dg-tech-appliance-repair-bd26
Nextdoor: https://nextdoor.com/pages/dg-tech-appliance-repair-san-rafael-ca/
Article Source Here:
Why hiring an appliance repair service in San Rafael is a smarter option than Repacing them?